diff --git a/rabbitmq.config b/rabbitmq.config
new file mode 100644
index 0000000..9a3a47f
--- /dev/null
+++ b/rabbitmq.config
@@ -0,0 +1,1060 @@
+# ======================================
+# RabbitMQ broker section
+# ======================================
+
+## Related doc guide: https://rabbitmq.com/configure.html. See
+## https://rabbitmq.com/documentation.html for documentation ToC.
+
+## Networking
+## ====================
+##
+## Related doc guide: https://rabbitmq.com/networking.html.
+##
+## By default, RabbitMQ will listen on all interfaces, using
+## the standard (reserved) AMQP 0-9-1 and 1.0 port.
+##
+listeners.tcp.default = 5672
+
+
+## To listen on a specific interface, provide an IP address with port.
+## For example, to listen only on localhost for both IPv4 and IPv6:
+##
+# IPv4
+# listeners.tcp.local    = 127.0.0.1:5672
+# IPv6
+# listeners.tcp.local_v6 = ::1:5672
+
+## You can define multiple listeners using listener names
+# listeners.tcp.other_port = 5673
+# listeners.tcp.other_ip   = 10.10.10.10:5672
+
+
+## TLS listeners are configured in the same fashion as TCP listeners,
+## including the option to control the choice of interface.
+##
+# listeners.ssl.default = 5671
+
+## It is possible to disable regular TCP (non-TLS) listeners. Clients
+## not configured to use TLS and the correct TLS-enabled port won't be able
+## to connect to this node.
+# listeners.tcp = none
+
+## Number of Erlang processes that will accept connections for the TCP
+## and TLS listeners.
+##
+# num_acceptors.tcp = 10
+# num_acceptors.ssl = 10
+
+## Socket writer will force GC every so many bytes transferred.
+## Default is 1 GiB (`1000000000`). Set to 'off' to disable.
+##
+# socket_writer.gc_threshold = 1000000000
+#
+## To disable:
+# socket_writer.gc_threshold = off
+
+## Maximum amount of time allowed for the AMQP 0-9-1 and AMQP 1.0 handshake
+## (performed after socket connection and TLS handshake) to complete, in milliseconds.
+##
+# handshake_timeout = 10000
+
+## Set to 'true' to perform reverse DNS lookups when accepting a
+## connection. rabbitmqctl and management UI will then display hostnames
+## instead of IP addresses. Default value is `false`.
+##
+# reverse_dns_lookups = false
+
+##
+## Security, Access Control
+## ==============
+##
+
+## Related doc guide: https://rabbitmq.com/access-control.html.
+
+## The default "guest" user is only permitted to access the server
+## via a loopback interface (e.g. localhost).
+## {loopback_users, [<<"guest">>]},
+##
+loopback_users.guest = false
+
+## Uncomment the following line if you want to allow access to the
+## guest user from anywhere on the network.
+# loopback_users.guest = false
+
+## TLS configuration.
+##
+## Related doc guide: https://rabbitmq.com/ssl.html.
+##
+# listeners.ssl.1                  = 5671
+#
+# ssl_options.verify               = verify_peer
+# ssl_options.fail_if_no_peer_cert = false
+# ssl_options.cacertfile           = /path/to/cacert.pem
+# ssl_options.certfile             = /path/to/cert.pem
+# ssl_options.keyfile              = /path/to/key.pem
+#
+# ssl_options.honor_cipher_order   = true
+# ssl_options.honor_ecc_order      = true
+#
+## These are highly recommended for TLSv1.2 but cannot be used
+## with TLSv1.3. If TLSv1.3 is enabled, these lines MUST be removed.
+# ssl_options.client_renegotiation = false
+# ssl_options.secure_renegotiate   = true
+#
+## Limits what TLS versions the server enables for client TLS
+## connections. See https://www.rabbitmq.com/ssl.html#tls-versions for details.
+##
+## Cutting edge TLS version which requires recent client runtime
+## versions and has no cipher suite in common with earlier TLS versions.
+# ssl_options.versions.1 = tlsv1.3
+## Enables TLSv1.2 for best compatibility
+# ssl_options.versions.2 = tlsv1.2
+## Older TLS versions have known vulnerabilities and are being phased out
+## from wide use.
+
+## Limits what cipher suites the server will use for client TLS
+## connections. Narrowing this down can prevent some clients
+## from connecting.
+## If TLSv1.3 is enabled and cipher suites are overridden, TLSv1.3-specific
+## cipher suites must also be explicitly enabled.
+## See https://www.rabbitmq.com/ssl.html#cipher-suites and https://wiki.openssl.org/index.php/TLS1.3#Ciphersuites
+## for details.
+#
+## The example below uses TLSv1.3 cipher suites only
+#
+# ssl_options.ciphers.1  = TLS_AES_256_GCM_SHA384
+# ssl_options.ciphers.2  = TLS_AES_128_GCM_SHA256
+# ssl_options.ciphers.3  = TLS_CHACHA20_POLY1305_SHA256
+# ssl_options.ciphers.4  = TLS_AES_128_CCM_SHA256
+# ssl_options.ciphers.5  = TLS_AES_128_CCM_8_SHA256
+#
+## The example below uses TLSv1.2 cipher suites only
+#
+# ssl_options.ciphers.1  = ECDHE-ECDSA-AES256-GCM-SHA384
+# ssl_options.ciphers.2  = ECDHE-RSA-AES256-GCM-SHA384
+# ssl_options.ciphers.3  = ECDHE-ECDSA-AES256-SHA384
+# ssl_options.ciphers.4  = ECDHE-RSA-AES256-SHA384
+# ssl_options.ciphers.5  = ECDH-ECDSA-AES256-GCM-SHA384
+# ssl_options.ciphers.6  = ECDH-RSA-AES256-GCM-SHA384
+# ssl_options.ciphers.7  = ECDH-ECDSA-AES256-SHA384
+# ssl_options.ciphers.8  = ECDH-RSA-AES256-SHA384
+# ssl_options.ciphers.9  = DHE-RSA-AES256-GCM-SHA384
+# ssl_options.ciphers.10 = DHE-DSS-AES256-GCM-SHA384
+# ssl_options.ciphers.11 = DHE-RSA-AES256-SHA256
+# ssl_options.ciphers.12 = DHE-DSS-AES256-SHA256
+# ssl_options.ciphers.13 = ECDHE-ECDSA-AES128-GCM-SHA256
+# ssl_options.ciphers.14 = ECDHE-RSA-AES128-GCM-SHA256
+# ssl_options.ciphers.15 = ECDHE-ECDSA-AES128-SHA256
+# ssl_options.ciphers.16 = ECDHE-RSA-AES128-SHA256
+# ssl_options.ciphers.17 = ECDH-ECDSA-AES128-GCM-SHA256
+# ssl_options.ciphers.18 = ECDH-RSA-AES128-GCM-SHA256
+# ssl_options.ciphers.19 = ECDH-ECDSA-AES128-SHA256
+# ssl_options.ciphers.20 = ECDH-RSA-AES128-SHA256
+# ssl_options.ciphers.21 = DHE-RSA-AES128-GCM-SHA256
+# ssl_options.ciphers.22 = DHE-DSS-AES128-GCM-SHA256
+# ssl_options.ciphers.23 = DHE-RSA-AES128-SHA256
+# ssl_options.ciphers.24 = DHE-DSS-AES128-SHA256
+# ssl_options.ciphers.25 = ECDHE-ECDSA-AES256-SHA
+# ssl_options.ciphers.26 = ECDHE-RSA-AES256-SHA
+# ssl_options.ciphers.27 = DHE-RSA-AES256-SHA
+# ssl_options.ciphers.28 = DHE-DSS-AES256-SHA
+# ssl_options.ciphers.29 = ECDH-ECDSA-AES256-SHA
+# ssl_options.ciphers.30 = ECDH-RSA-AES256-SHA
+# ssl_options.ciphers.31 = ECDHE-ECDSA-AES128-SHA
+# ssl_options.ciphers.32 = ECDHE-RSA-AES128-SHA
+# ssl_options.ciphers.33 = DHE-RSA-AES128-SHA
+# ssl_options.ciphers.34 = DHE-DSS-AES128-SHA
+# ssl_options.ciphers.35 = ECDH-ECDSA-AES128-SHA
+# ssl_options.ciphers.36 = ECDH-RSA-AES128-SHA
+
+# ssl_options.bypass_pem_cache = true
+
+## Select an authentication/authorisation backend to use.
+##
+## Alternative backends are provided by plugins, such as rabbitmq-auth-backend-ldap.
+##
+## NB: These settings require certain plugins to be enabled.
+##
+## Related doc guides:
+##
+##  * https://rabbitmq.com/plugins.html
+##  * https://rabbitmq.com/access-control.html
+##
+
+# auth_backends.1   = rabbit_auth_backend_internal
+
+## uses separate backends for authentication and authorisation,
+## see below.
+# auth_backends.1.authn = rabbit_auth_backend_ldap
+# auth_backends.1.authz = rabbit_auth_backend_internal
+
+## The rabbitmq_auth_backend_ldap plugin allows the broker to
+## perform authentication and authorisation by deferring to an
+## external LDAP server.
+##
+## Relevant doc guides:
+##
+## * https://rabbitmq.com/ldap.html
+## * https://rabbitmq.com/access-control.html
+##
+## uses LDAP for both authentication and authorisation
+# auth_backends.1 = rabbit_auth_backend_ldap
+
+## uses HTTP service for both authentication and
+## authorisation
+# auth_backends.1 = rabbit_auth_backend_http
+
+## uses two backends in a chain: HTTP first, then internal
+# auth_backends.1   = rabbit_auth_backend_http
+# auth_backends.2   = rabbit_auth_backend_internal
+
+## Authentication
+## The built-in mechanisms are 'PLAIN',
+## 'AMQPLAIN', and 'EXTERNAL' Additional mechanisms can be added via
+## plugins.
+##
+## Related doc guide: https://rabbitmq.com/authentication.html.
+##
+# auth_mechanisms.1 = PLAIN
+# auth_mechanisms.2 = AMQPLAIN
+
+## The rabbitmq-auth-mechanism-ssl plugin makes it possible to
+## authenticate a user based on the client's x509 (TLS) certificate.
+## Related doc guide: https://rabbitmq.com/authentication.html.
+##
+## To use auth-mechanism-ssl, the EXTERNAL mechanism should
+## be enabled:
+##
+# auth_mechanisms.1 = PLAIN
+# auth_mechanisms.2 = AMQPLAIN
+# auth_mechanisms.3 = EXTERNAL
+
+## To force x509 certificate-based authentication on all clients,
+## exclude all other mechanisms (note: this will disable password-based
+## authentication even for the management UI!):
+##
+# auth_mechanisms.1 = EXTERNAL
+
+## This pertains to both the rabbitmq-auth-mechanism-ssl plugin and
+## STOMP ssl_cert_login configurations. See the RabbitMQ STOMP plugin
+## configuration section later in this file and the README in
+## https://github.com/rabbitmq/rabbitmq-auth-mechanism-ssl for further
+## details.
+##
+## To use the TLS cert's CN instead of its DN as the username
+##
+# ssl_cert_login_from   = common_name
+
+## TLS handshake timeout, in milliseconds.
+##
+# ssl_handshake_timeout = 5000
+
+
+## Cluster name
+##
+# cluster_name = dev3.eng.megacorp.local
+
+## Password hashing implementation. Will only affect newly
+## created users. To recalculate hash for an existing user
+## it's necessary to update her password.
+##
+## To use SHA-512, set to rabbit_password_hashing_sha512.
+##
+# password_hashing_module = rabbit_password_hashing_sha256
+
+## When importing definitions exported from versions earlier
+## than 3.6.0, it is possible to go back to MD5 (only do this
+## as a temporary measure!) by setting this to rabbit_password_hashing_md5.
+##
+# password_hashing_module = rabbit_password_hashing_md5
+
+##
+## Default User / VHost
+## ====================
+##
+
+## On first start RabbitMQ will create a vhost and a user. These
+## config items control what gets created.
+## Relevant doc guide: https://rabbitmq.com/access-control.html
+##
+# default_vhost = /
+default_user = user
+default_pass = rabbitmq
+
+# default_permissions.configure = .*
+# default_permissions.read = .*
+# default_permissions.write = .*
+
+## Tags for default user
+##
+## For more details about tags, see the documentation for the
+## Management Plugin at https://rabbitmq.com/management.html.
+##
+# default_user_tags.administrator = true
+
+## Define other tags like this:
+# default_user_tags.management = true
+# default_user_tags.custom_tag = true
+
+##
+## Additional network and protocol related configuration
+## =====================================================
+##
+
+## Set the server AMQP 0-9-1 heartbeat timeout in seconds.
+## RabbitMQ nodes will send heartbeat frames at roughly
+## the (timeout / 2) interval. Two missed heartbeats from
+## a client will close its connection.
+##
+## Values lower than 6 seconds are very likely to produce
+## false positives and are not recommended.
+##
+## Related doc guides:
+##
+## * https://rabbitmq.com/heartbeats.html
+## * https://rabbitmq.com/networking.html
+##
+# heartbeat = 60
+
+## Set the max permissible size of an AMQP frame (in bytes).
+##
+# frame_max = 131072
+
+## Set the max frame size the server will accept before connection
+## tuning occurs
+##
+# initial_frame_max = 4096
+
+## Set the max permissible number of channels per connection.
+## 0 means "no limit".
+##
+# channel_max = 128
+
+## Customising TCP Listener (Socket) Configuration.
+##
+## Related doc guides:
+##
+## * https://rabbitmq.com/networking.html
+## * https://www.erlang.org/doc/man/inet.html#setopts-2
+##
+
+# tcp_listen_options.backlog = 128
+# tcp_listen_options.nodelay = true
+# tcp_listen_options.exit_on_close = false
+#
+# tcp_listen_options.keepalive = true
+# tcp_listen_options.send_timeout = 15000
+#
+# tcp_listen_options.buffer = 196608
+# tcp_listen_options.sndbuf = 196608
+# tcp_listen_options.recbuf = 196608
+
+##
+## Resource Limits & Flow Control
+## ==============================
+##
+## Related doc guide: https://rabbitmq.com/memory.html.
+
+## Memory-based Flow Control threshold.
+##
+# vm_memory_high_watermark.relative = 0.4
+
+## Alternatively, we can set a limit (in bytes) of RAM used by the node.
+##
+# vm_memory_high_watermark.absolute = 1073741824
+
+## Or you can set absolute value using memory units (with RabbitMQ 3.6.0+).
+## Absolute watermark will be ignored if relative is defined!
+##
+# vm_memory_high_watermark.absolute = 2GB
+##
+## Supported unit symbols:
+##
+## k, kiB: kibibytes (2^10 - 1,024 bytes)
+## M, MiB: mebibytes (2^20 - 1,048,576 bytes)
+## G, GiB: gibibytes (2^30 - 1,073,741,824 bytes)
+## kB: kilobytes (10^3 - 1,000 bytes)
+## MB: megabytes (10^6 - 1,000,000 bytes)
+## GB: gigabytes (10^9 - 1,000,000,000 bytes)
+
+
+
+## Fraction of the high watermark limit at which queues start to
+## page message out to disc in order to free up memory.
+## For example, when vm_memory_high_watermark is set to 0.4 and this value is set to 0.5,
+## paging can begin as early as when 20% of total available RAM is used by the node.
+##
+## Values greater than 1.0 can be dangerous and should be used carefully.
+##
+## One alternative to this is to use durable queues and publish messages
+## as persistent (delivery mode = 2). With this combination queues will
+## move messages to disk much more rapidly.
+##
+## Another alternative is to configure queues to page all messages (both
+## persistent and transient) to disk as quickly
+## as possible, see https://rabbitmq.com/lazy-queues.html.
+##
+# vm_memory_high_watermark_paging_ratio = 0.5
+
+## Selects Erlang VM memory consumption calculation strategy. Can be `allocated`, `rss` or `legacy` (aliased as `erlang`),
+## Introduced in 3.6.11. `rss` is the default as of 3.6.12.
+## See https://github.com/rabbitmq/rabbitmq-server/issues/1223 and rabbitmq/rabbitmq-common#224 for background.
+# vm_memory_calculation_strategy = rss
+
+## Interval (in milliseconds) at which we perform the check of the memory
+## levels against the watermarks.
+##
+# memory_monitor_interval = 2500
+
+## The total memory available can be calculated from the OS resources
+## - default option - or provided as a configuration parameter.
+# total_memory_available_override_value = 2GB
+
+## Set disk free limit (in bytes). Once free disk space reaches this
+## lower bound, a disk alarm will be set - see the documentation
+## listed above for more details.
+##
+## Absolute watermark will be ignored if relative is defined!
+# disk_free_limit.absolute = 50000
+
+## Or you can set it using memory units (same as in vm_memory_high_watermark)
+## with RabbitMQ 3.6.0+.
+# disk_free_limit.absolute = 500KB
+# disk_free_limit.absolute = 50mb
+# disk_free_limit.absolute = 5GB
+
+## Alternatively, we can set a limit relative to total available RAM.
+##
+## Values lower than 1.0 can be dangerous and should be used carefully.
+# disk_free_limit.relative = 2.0
+
+##
+## Clustering
+## =====================
+##
+# cluster_partition_handling = ignore
+
+## Pauses all nodes on the minority side of a partition. The cluster
+## MUST have an odd number of nodes (3, 5, etc)
+# cluster_partition_handling = pause_minority
+
+## pause_if_all_down strategy require additional configuration
+# cluster_partition_handling = pause_if_all_down
+
+## Recover strategy. Can be either 'autoheal' or 'ignore'
+# cluster_partition_handling.pause_if_all_down.recover = ignore
+
+## Node names to check
+# cluster_partition_handling.pause_if_all_down.nodes.1 = rabbit@localhost
+# cluster_partition_handling.pause_if_all_down.nodes.2 = hare@localhost
+
+## Mirror sync batch size, in messages. Increasing this will speed
+## up syncing but total batch size in bytes must not exceed 2 GiB.
+## Available in RabbitMQ 3.6.0 or later.
+##
+# mirroring_sync_batch_size = 4096
+
+## Make clustering happen *automatically* at startup. Only applied
+## to nodes that have just been reset or started for the first time.
+##
+## Relevant doc guide: https://rabbitmq.com//cluster-formation.html
+##
+
+# cluster_formation.peer_discovery_backend     = rabbit_peer_discovery_classic_config
+#
+# cluster_formation.classic_config.nodes.1 = rabbit1@hostname
+# cluster_formation.classic_config.nodes.2 = rabbit2@hostname
+# cluster_formation.classic_config.nodes.3 = rabbit3@hostname
+# cluster_formation.classic_config.nodes.4 = rabbit4@hostname
+
+## DNS-based peer discovery. This backend will list A records
+## of the configured hostname and perform reverse lookups for
+## the addresses returned.
+
+# cluster_formation.peer_discovery_backend = rabbit_peer_discovery_dns
+# cluster_formation.dns.hostname = discovery.eng.example.local
+
+## This node's type can be configured. If you are not sure
+## what node type to use, always use 'disc'.
+# cluster_formation.node_type = disc
+
+## Interval (in milliseconds) at which we send keepalive messages
+## to other cluster members. Note that this is not the same thing
+## as net_ticktime; missed keepalive messages will not cause nodes
+## to be considered down.
+##
+# cluster_keepalive_interval = 10000
+
+##
+## Statistics Collection
+## =====================
+##
+
+## Statistics collection interval (in milliseconds). Increasing
+## this will reduce the load on management database.
+##
+# collect_statistics_interval = 5000
+
+## Fine vs. coarse statistics
+#
+# This value is no longer meant to be configured directly.
+#
+# See https://www.rabbitmq.com/management.html#fine-stats.
+
+##
+## Ra Settings
+## =====================
+##
+# raft.segment_max_entries = 65536
+# raft.wal_max_size_bytes = 1048576
+# raft.wal_max_batch_size = 4096
+# raft.snapshot_chunk_size = 1000000
+
+##
+## Misc/Advanced Options
+## =====================
+##
+## NB: Change these only if you understand what you are doing!
+##
+
+## Timeout used when waiting for Mnesia tables in a cluster to
+## become available.
+##
+# mnesia_table_loading_retry_timeout = 30000
+
+## Retries when waiting for Mnesia tables in the cluster startup. Note that
+## this setting is not applied to Mnesia upgrades or node deletions.
+##
+# mnesia_table_loading_retry_limit = 10
+
+## Size in bytes below which to embed messages in the queue index.
+## Related doc guide: https://rabbitmq.com/persistence-conf.html
+##
+# queue_index_embed_msgs_below = 4096
+
+## You can also set this size in memory units
+##
+# queue_index_embed_msgs_below = 4kb
+
+## Whether or not to enable background periodic forced GC runs for all
+## Erlang processes on the node in "waiting" state.
+##
+## Disabling background GC may reduce latency for client operations,
+## keeping it enabled may reduce median RAM usage by the binary heap
+## (see https://www.erlang-solutions.com/blog/erlang-garbage-collector.html).
+##
+## Before trying this option, please take a look at the memory
+## breakdown (https://www.rabbitmq.com/memory-use.html).
+##
+# background_gc_enabled = false
+
+## Target (desired) interval (in milliseconds) at which we run background GC.
+## The actual interval will vary depending on how long it takes to execute
+## the operation (can be higher than this interval). Values less than
+## 30000 milliseconds are not recommended.
+##
+# background_gc_target_interval = 60000
+
+## Whether or not to enable proxy protocol support.
+## Once enabled, clients cannot directly connect to the broker
+## anymore. They must connect through a load balancer that sends the
+## proxy protocol header to the broker at connection time.
+## This setting applies only to AMQP clients, other protocols
+## like MQTT or STOMP have their own setting to enable proxy protocol.
+## See the plugins documentation for more information.
+##
+# proxy_protocol = false
+
+## Overriden product name and version.
+## They are set to "RabbitMQ" and the release version by default.
+# product.name = RabbitMQ
+# product.version = 1.2.3
+
+## "Message of the day" file.
+## Its content is used to expand the logged and printed banners.
+## Default to /etc/rabbitmq/motd on Unix, %APPDATA%\RabbitMQ\motd.txt
+## on Windows.
+# motd_file = /etc/rabbitmq/motd
+
+## Consumer timeout
+## If a message delivered to a consumer has not been acknowledge before this timer
+## triggers the channel will be force closed by the broker. This ensure that
+## faultly consumers that never ack will not hold on to messages indefinitely.
+##
+# consumer_timeout = 900000
+
+## ----------------------------------------------------------------------------
+## Advanced Erlang Networking/Clustering Options.
+##
+## Related doc guide: https://rabbitmq.com/clustering.html
+## ----------------------------------------------------------------------------
+
+# ======================================
+# Kernel section
+# ======================================
+
+## Timeout used to detect peer unavailability, including CLI tools.
+## Related doc guide: https://www.rabbitmq.com/nettick.html.
+##
+# net_ticktime = 60
+
+## Inter-node communication port range.
+## The parameters inet_dist_listen_min and inet_dist_listen_max
+## can be configured in the classic config format only.
+## Related doc guide: https://www.rabbitmq.com/networking.html#epmd-inet-dist-port-range.
+
+
+## ----------------------------------------------------------------------------
+## RabbitMQ Management Plugin
+##
+## Related doc guide: https://rabbitmq.com/management.html.
+## ----------------------------------------------------------------------------
+
+# =======================================
+# Management section
+# =======================================
+
+## Preload schema definitions from the following JSON file.
+## Related doc guide: https://rabbitmq.com/management.html#load-definitions.
+##
+# management.load_definitions = /path/to/exported/definitions.json
+
+## Log all requests to the management HTTP API to a file.
+##
+# management.http_log_dir = /path/to/access.log
+
+## HTTP listener and embedded Web server settings.
+# ## See https://rabbitmq.com/management.html for details.
+#
+management.tcp.port = 15672
+# management.tcp.ip   = 0.0.0.0
+#
+# management.tcp.shutdown_timeout   = 7000
+# management.tcp.max_keepalive      = 120
+# management.tcp.idle_timeout       = 120
+# management.tcp.inactivity_timeout = 120
+# management.tcp.request_timeout    = 120
+# management.tcp.compress           = true
+
+## HTTPS listener settings.
+## See https://rabbitmq.com/management.html and https://rabbitmq.com/ssl.html for details.
+##
+# management.ssl.port       = 15671
+# management.ssl.cacertfile = /path/to/ca_certificate.pem
+# management.ssl.certfile   = /path/to/server_certificate.pem
+# management.ssl.keyfile    = /path/to/server_key.pem
+
+## More TLS options
+# management.ssl.honor_cipher_order   = true
+# management.ssl.honor_ecc_order      = true
+
+## These are highly recommended for TLSv1.2 but cannot be used
+## with TLSv1.3. If TLSv1.3 is enabled, these lines MUST be removed.
+# management.ssl.client_renegotiation = false
+# management.ssl.secure_renegotiate   = true
+
+## Supported TLS versions
+# management.ssl.versions.1 = tlsv1.2
+
+## Cipher suites the server is allowed to use
+# management.ssl.ciphers.1 = ECDHE-ECDSA-AES256-GCM-SHA384
+# management.ssl.ciphers.2 = ECDHE-RSA-AES256-GCM-SHA384
+# management.ssl.ciphers.3 = ECDHE-ECDSA-AES256-SHA384
+# management.ssl.ciphers.4 = ECDHE-RSA-AES256-SHA384
+# management.ssl.ciphers.5 = ECDH-ECDSA-AES256-GCM-SHA384
+# management.ssl.ciphers.6 = ECDH-RSA-AES256-GCM-SHA384
+# management.ssl.ciphers.7 = ECDH-ECDSA-AES256-SHA384
+# management.ssl.ciphers.8 = ECDH-RSA-AES256-SHA384
+# management.ssl.ciphers.9 = DHE-RSA-AES256-GCM-SHA384
+
+## URL path prefix for HTTP API and management UI
+# management.path_prefix = /a-prefix
+
+## One of 'basic', 'detailed' or 'none'. See
+## https://rabbitmq.com/management.html#fine-stats for more details.
+# management.rates_mode = basic
+
+## Configure how long aggregated data (such as message rates and queue
+## lengths) is retained. Please read the plugin's documentation in
+## https://rabbitmq.com/management.html#configuration for more
+## details.
+## Your can use 'minute', 'hour' and 'day' keys or integer key (in seconds)
+# management.sample_retention_policies.global.minute    = 5
+# management.sample_retention_policies.global.hour  = 60
+# management.sample_retention_policies.global.day = 1200
+
+# management.sample_retention_policies.basic.minute   = 5
+# management.sample_retention_policies.basic.hour = 60
+
+# management.sample_retention_policies.detailed.10 = 5
+
+## ----------------------------------------------------------------------------
+## RabbitMQ Shovel Plugin
+##
+## Related doc guide: https://rabbitmq.com/shovel.html
+## ----------------------------------------------------------------------------
+
+## See advanced.config.example for a Shovel plugin example
+
+
+## ----------------------------------------------------------------------------
+## RabbitMQ STOMP Plugin
+##
+## Related doc guide: https://rabbitmq.com/stomp.html
+## ----------------------------------------------------------------------------
+
+# =======================================
+# STOMP section
+# =======================================
+
+## See https://rabbitmq.com/stomp.html for details.
+
+## TCP listeners.
+##
+# stomp.listeners.tcp.1 = 127.0.0.1:61613
+# stomp.listeners.tcp.2 = ::1:61613
+
+## TCP listener settings
+##
+# stomp.tcp_listen_options.backlog   = 2048
+# stomp.tcp_listen_options.recbuf    = 131072
+# stomp.tcp_listen_options.sndbuf    = 131072
+#
+# stomp.tcp_listen_options.keepalive = true
+# stomp.tcp_listen_options.nodelay   = true
+#
+# stomp.tcp_listen_options.exit_on_close = true
+# stomp.tcp_listen_options.send_timeout  = 120
+
+## Proxy protocol support
+##
+# stomp.proxy_protocol = false
+
+## TLS listeners
+## See https://rabbitmq.com/stomp.html and https://rabbitmq.com/ssl.html for details.
+# stomp.listeners.ssl.default = 61614
+#
+# ssl_options.cacertfile = path/to/cacert.pem
+# ssl_options.certfile   = path/to/cert.pem
+# ssl_options.keyfile    = path/to/key.pem
+# ssl_options.verify     =  verify_peer
+# ssl_options.fail_if_no_peer_cert = true
+
+
+## Number of Erlang processes that will accept connections for the TCP
+## and TLS listeners.
+##
+# stomp.num_acceptors.tcp = 10
+# stomp.num_acceptors.ssl = 1
+
+## Additional TLS options
+
+## Extract a name from the client's certificate when using TLS.
+##
+# stomp.ssl_cert_login = true
+
+## Set a default user name and password. This is used as the default login
+## whenever a CONNECT frame omits the login and passcode headers.
+##
+## Please note that setting this will allow clients to connect without
+## authenticating!
+##
+# stomp.default_user = guest
+# stomp.default_pass = guest
+
+## If a default user is configured, or you have configured use TLS client
+## certificate based authentication, you can choose to allow clients to
+## omit the CONNECT frame entirely. If set to true, the client is
+## automatically connected as the default user or user supplied in the
+## TLS certificate whenever the first frame sent on a session is not a
+## CONNECT frame.
+##
+# stomp.implicit_connect = true
+
+## Whether or not to enable proxy protocol support.
+## Once enabled, clients cannot directly connect to the broker
+## anymore. They must connect through a load balancer that sends the
+## proxy protocol header to the broker at connection time.
+## This setting applies only to STOMP clients, other protocols
+## like MQTT or AMQP have their own setting to enable proxy protocol.
+## See the plugins or broker documentation for more information.
+##
+# stomp.proxy_protocol = false
+
+## ----------------------------------------------------------------------------
+## RabbitMQ MQTT Adapter
+##
+## See https://github.com/rabbitmq/rabbitmq-mqtt/blob/stable/README.md
+## for details
+## ----------------------------------------------------------------------------
+
+# =======================================
+# MQTT section
+# =======================================
+
+## TCP listener settings.
+##
+# mqtt.listeners.tcp.1 = 127.0.0.1:61613
+# mqtt.listeners.tcp.2 = ::1:61613
+
+## TCP listener options (as per the broker configuration).
+##
+# mqtt.tcp_listen_options.backlog = 4096
+# mqtt.tcp_listen_options.recbuf  = 131072
+# mqtt.tcp_listen_options.sndbuf  = 131072
+#
+# mqtt.tcp_listen_options.keepalive = true
+# mqtt.tcp_listen_options.nodelay   = true
+#
+# mqtt.tcp_listen_options.exit_on_close = true
+# mqtt.tcp_listen_options.send_timeout  = 120
+
+## TLS listener settings
+## ## See https://rabbitmq.com/mqtt.html and https://rabbitmq.com/ssl.html for details.
+#
+# mqtt.listeners.ssl.default = 8883
+#
+# ssl_options.cacertfile = /path/to/tls/ca_certificate_bundle.pem
+# ssl_options.certfile   = /path/to/tls/server_certificate.pem
+# ssl_options.keyfile    = /path/to/tls/server_key.pem
+# ssl_options.verify     = verify_peer
+# ssl_options.fail_if_no_peer_cert  = true
+#
+
+
+## Number of Erlang processes that will accept connections for the TCP
+## and TLS listeners.
+##
+# mqtt.num_acceptors.tcp = 10
+# mqtt.num_acceptors.ssl = 10
+
+## Whether or not to enable proxy protocol support.
+## Once enabled, clients cannot directly connect to the broker
+## anymore. They must connect through a load balancer that sends the
+## proxy protocol header to the broker at connection time.
+## This setting applies only to STOMP clients, other protocols
+## like STOMP or AMQP have their own setting to enable proxy protocol.
+## See the plugins or broker documentation for more information.
+##
+# mqtt.proxy_protocol = false
+
+## Set the default user name and password used for anonymous connections (when client
+## provides no credentials). Anonymous connections are highly discouraged!
+##
+# mqtt.default_user = guest
+# mqtt.default_pass = guest
+
+## Enable anonymous connections. If this is set to false, clients MUST provide
+## credentials in order to connect. See also the mqtt.default_user/mqtt.default_pass
+## keys. Anonymous connections are highly discouraged!
+##
+# mqtt.allow_anonymous = true
+
+## If you have multiple vhosts, specify the one to which the
+## adapter connects.
+##
+# mqtt.vhost = /
+
+## Specify the exchange to which messages from MQTT clients are published.
+##
+# mqtt.exchange = amq.topic
+
+## Specify TTL (time to live) to control the lifetime of non-clean sessions.
+##
+# mqtt.subscription_ttl = 1800000
+
+## Set the prefetch count (governing the maximum number of unacknowledged
+## messages that will be delivered).
+##
+# mqtt.prefetch = 10
+
+
+## ----------------------------------------------------------------------------
+## RabbitMQ AMQP 1.0 Support
+##
+## See https://github.com/rabbitmq/rabbitmq-amqp1.0/blob/stable/README.md.
+## ----------------------------------------------------------------------------
+
+# =======================================
+# AMQP 1.0 section
+# =======================================
+
+
+## Connections that are not authenticated with SASL will connect as this
+## account. See the README for more information.
+##
+## Please note that setting this will allow clients to connect without
+## authenticating!
+##
+# amqp1_0.default_user = guest
+
+## Enable protocol strict mode. See the README for more information.
+##
+# amqp1_0.protocol_strict_mode = false
+
+## Logging settings.
+##
+## See https://rabbitmq.com/logging.html for details.
+##
+
+## Log directory, taken from the RABBITMQ_LOG_BASE env variable by default.
+##
+# log.dir = /var/log/rabbitmq
+
+## Logging to file. Can be false or a filename.
+## Default:
+# log.file = rabbit.log
+
+## To disable logging to a file
+# log.file = false
+
+## Log level for file logging
+##
+# log.file.level = info
+
+## File rotation config. No rotation by default.
+## DO NOT SET rotation date to ''. Leave the value unset if "" is the desired value
+# log.file.rotation.date = $D0
+# log.file.rotation.size = 0
+
+## Logging to console (can be true or false)
+##
+# log.console = false
+
+## Log level for console logging
+##
+# log.console.level = info
+
+## Logging to the amq.rabbitmq.log exchange (can be true or false)
+##
+# log.exchange = false
+
+## Log level to use when logging to the amq.rabbitmq.log exchange
+##
+# log.exchange.level = info
+
+
+
+## ----------------------------------------------------------------------------
+## RabbitMQ LDAP Plugin
+##
+## Related doc guide: https://rabbitmq.com/ldap.html.
+##
+## ----------------------------------------------------------------------------
+
+# =======================================
+# LDAP section
+# =======================================
+
+##
+## Connecting to the LDAP server(s)
+## ================================
+##
+
+## Specify servers to bind to. You *must* set this in order for the plugin
+## to work properly.
+##
+# auth_ldap.servers.1 = your-server-name-goes-here
+
+## You can define multiple servers
+# auth_ldap.servers.2 = your-other-server
+
+## Connect to the LDAP server using TLS
+##
+# auth_ldap.use_ssl = false
+
+## Specify the LDAP port to connect to
+##
+# auth_ldap.port = 389
+
+## LDAP connection timeout, in milliseconds or 'infinity'
+##
+# auth_ldap.timeout = infinity
+
+## Or number
+# auth_ldap.timeout = 500
+
+## Enable logging of LDAP queries.
+## One of
+##   - false (no logging is performed)
+##   - true (verbose logging of the logic used by the plugin)
+##   - network (as true, but additionally logs LDAP network traffic)
+##
+## Defaults to false.
+##
+# auth_ldap.log = false
+
+## Also can be true or network
+# auth_ldap.log = true
+# auth_ldap.log = network
+
+##
+## Authentication
+## ==============
+##
+
+## Pattern to convert the username given through AMQP to a DN before
+## binding
+##
+# auth_ldap.user_dn_pattern = cn=${username},ou=People,dc=example,dc=com
+
+## Alternatively, you can convert a username to a Distinguished
+## Name via an LDAP lookup after binding. See the documentation for
+## full details.
+
+## When converting a username to a dn via a lookup, set these to
+## the name of the attribute that represents the user name, and the
+## base DN for the lookup query.
+##
+# auth_ldap.dn_lookup_attribute = userPrincipalName
+# auth_ldap.dn_lookup_base      = DC=gopivotal,DC=com
+
+## Controls how to bind for authorisation queries and also to
+## retrieve the details of users logging in without presenting a
+## password (e.g., SASL EXTERNAL).
+## One of
+##  - as_user (to bind as the authenticated user - requires a password)
+##  - anon    (to bind anonymously)
+##  - {UserDN, Password} (to bind with a specified user name and password)
+##
+## Defaults to 'as_user'.
+##
+# auth_ldap.other_bind = as_user
+
+## Or can be more complex:
+# auth_ldap.other_bind.user_dn  = User
+# auth_ldap.other_bind.password = Password
+
+## If user_dn and password defined - other options is ignored.
+
+# -----------------------------
+# Too complex section of LDAP
+# -----------------------------
+
+##
+## Authorisation
+## =============
+##
+
+## The LDAP plugin can perform a variety of queries against your
+## LDAP server to determine questions of authorisation.
+##
+## Related doc guide: https://rabbitmq.com/ldap.html#authorisation.
+
+## Following configuration should be defined in advanced.config file
+## DO NOT UNCOMMENT THESE LINES!
+
+## Set the query to use when determining vhost access
+##
+## {vhost_access_query, {in_group,
+##                       "ou=${vhost}-users,ou=vhosts,dc=example,dc=com"}},
+
+## Set the query to use when determining resource (e.g., queue) access
+##
+## {resource_access_query, {constant, true}},
+
+## Set queries to determine which tags a user has
+##
+## {tag_queries, []}
+#   ]},
+# -----------------------------
\ No newline at end of file